Product category：Sensor category
Product model：LoRaWAN-BGA2
Product Overview:
LoRaWAN-BGA2 light temperature and humidity sensor can monitor ambient light parameter, as well as temperature and humidity parameters, supporting LoRaWAN protocol. It uses 220V power adapter for supply, and can realize environmental parameters monitoring through remote data transmission. The sensor is widely used in agriculture, animal husbandry, food and medicine storage, HVAC (heating ventilation air conditioning), computer labs monitoring and other application scenarios.
Product Features:
● Supporting LoRaWAN transmission protocol.
● Supporting ultra-long distance transmission.
● High measuring accuracy.
● Strong anti-interference ability.
● Liquid crystal real-time parameter display.
● Low-power design for energy conservation and environmental protection.
Performance Parameter:
Measuring range:
Temperature measuring range: -40℃-125℃
Accuracy: ±0.3℃
Humidity measuring range: 0-100% RH
Accuracy: ±3% HT
Light measuring range: 0-0.2 million Lux
Accuracy: ±0.5 Lux
Service voltage: 100-240V
Sampling period: 1 second, configurable
Quiescent power dissipation: <500mW
Communication distance: >1km
Response time: 5 seconds
Output mode: LoRaWAN wireless
Operating frequency: CN470MHz/AS923MHz/EU868MHz
Display mode: LCD
Installation method: screws fixed
Operating Principle Topology Diagram:
Transportaion And Storage Conditions:
Temperature: -40℃~80℃ Humidity: 20~80%
Keep the sensor clean on the surface and dryness inside, without stain or damage.
Operating Environment Requirements:
Temperature: -20℃~60℃ Humidity: 20~80%
Keeping the equipment in good condition can prolong the life of the equipment, and lead to more accurate data testing and stable work.
Operating Process:
Installation Instructions:
When installing the equipment, the photic port and the temperature and humidity probe should be exposed to the air in the real time. Don’t shield or unscrew the photic cover. Please do not put the equipment in the water or any place near splashing water. Use screws in the installation place (φ3.5) around the product, fix it on the stand of operation site, and tighten the screws.
Power On:
After wiring product following steps above, insert 5V DC into the power interface. When the LCD displays numeric value and the communication return to normal, the sensor can operate normally.
1. Lux: 43 represents the real-time teasing of illumination intensity.
2. Temp: 24.70 represents the real-time teasing of temperature.
3. Humi: 61.77 represents the real-time teasing of humidity.
4. Sampling period: T=1 second per time.
5. Response time: 20% amplitude of variation needs 3 seconds.
6. Output mode: LoRaWAN wireless.
7. Measurement accuracy: light ±5%Lux, humidity: ±3%HT, temperature: ±0.3℃.